LFGB vs FDA: What Plastic Food-Contact Compliance Really Requires

The most common compliance question we get from new buyers is “are you FDA certified?” It is a reasonable question built on a wrong assumption, because the US Food and Drug Administration does not certify food-contact articles at all. Understanding that difference — and what LFGB actually is — saves buyers weeks and avoids paying for the wrong test.

The short answer

  • LFGB is German national law. In practice a German-market food-contact report means testing to LFGB plus the EU plastics regulation, issued by an accredited lab, and shipped with a Declaration of Compliance.
  • FDA compliance is not a certificate. It means the formulation and the finished article meet the relevant sections of 21 CFR, documented through resin supplier statements and your own letter of compliance.
  • Neither document is issued by a government body for a specific SKU. Both are only valid for the material, colour and process they were tested on.

What LFGB actually covers

LFGB is the German Food, Feed and Commodities Code. Articles 30 and 31 set the requirements for food-contact materials, and German buyers typically ask for a test report that combines LFGB with EU framework Regulation 1935/2004 and plastics Regulation 10/2011.

What makes LFGB distinctive is the sensory requirement. Beyond migration limits, the material must not impart odour or taste to food. Labs assess this through sensory evaluation after defined contact conditions, which is why an LFGB report often catches problems that a pure migration test misses — residual monomers, odour from recycled content, or inks and adhesives in a multi-layer assembly.

A typical LFGB package for a plastic houseware item includes overall and specific migration, heavy metals, primary aromatic amines, phthalates where relevant, and the sensory panel. Reports are issued by accredited third-party labs, not by the German government.

Food-contact containers before LFGB testing: material grade, migration limits and packaging all sit in scope.
Plastic food storage containers, the product type most often subject to LFGB and FDA compliance questions

What “FDA compliant” actually means

In the US, food-contact materials are regulated under the Federal Food, Drug and Cosmetic Act and the food-contact substance regulations in 21 CFR Parts 174–186. For a polypropylene bin, the relevant section is typically 21 CFR 177.1520 for olefin polymers; other polymers sit in their own sections.

Compliance is demonstrated in three ways: the resin supplier confirms the grade is covered by an existing regulation or a Food Contact Notification, the converter processes it within the specified conditions of use, and the finished article is accompanied by a letter of compliance or guarantee. There is no government certificate and no FDA mark to print on a carton.

One frequent confusion: FDA facility registration applies to food and food-producing facilities, not to a plastic houseware factory making storage bins. A factory registration number does not make a product FDA compliant.

The documents a buyer should actually ask for

  1. Declaration of Compliance (EU) — naming the article, materials, migration limits and the supporting test reports.
  2. Migration test report — from an accredited lab, listing the simulants and contact conditions used.
  3. LFGB report — if the destination is Germany, or if your retail customer requires sensory testing.
  4. Resin compliance statement — the FDA-side document, referencing the applicable 21 CFR section or FCN number.
  5. Colour and process coverage — confirmation that the tested sample covers the colours and wall thicknesses you actually order.

Four myths worth correcting early

“We need an FDA certificate.” There is no such document. Ask for a compliance letter instead, and check that it names the regulation.

“LFGB is the European standard.” LFGB is German. The EU-wide instruments are 1935/2004 and 10/2011. A German report usually covers both, which is why it is widely used, but the legal basis differs.

“One report covers all our SKUs.” Reports are tied to material, colour and thickness. A new colour masterbatch or a thinner wall can void coverage and require re-assessment.

“Testing after tooling is fine.” Testing after tooling is when problems get expensive. Sample-stage testing on the intended material and colour is cheaper and faster.

Which market needs what

  • EU / Germany — DoC plus 10/2011 migration data; LFGB report for German retail.
  • United States — 21 CFR compliance letter plus resin supplier statement.
  • UK — retained EU food-contact law, same document set as the EU in practice.
  • Middle East and Asia — national standards vary; confirm with the importer before sampling.

How we handle it

Some of our food-contact products have been tested to LFGB. For items that have not, we can arrange third-party testing to the standard your market requires, and we tell you the cost and lead time before you commit rather than after. Because colour changes can affect test coverage, we prefer to fix the colour and material at sampling stage.

Sampling runs 3–15 days depending on complexity, and bulk production 15–25 days after approval. If you need a specific document set for a tender or a retail onboarding pack, send the list to sales1@chinacostar.com and we will confirm what we can supply and what needs a new test.

Similar Posts